2020 Ford Explorer Oil Filter: Specs & Service

The 2020 Ford Explorer is a capable SUV with engine options ranging from 2.3 to 3.3 liters and four to six cylinders, making proper oil filtration important for clean engine lubrication. At Herb Chambers Ford of Westborough in Westborough, MA, an oil filter service replaces the filter alongside the oil and uses a filter matched to the engine actually fitted in your Explorer. The service includes a new drain plug gasket or washer where the engine uses one, followed by a leak check after the engine runs. Replacing the filter at the manufacturer’s published interval helps keep debris from circulating through the engine unfiltered. Schedule service when your 2020 Ford Explorer is due for this maintenance.

What an oil filter replacement on a 2020 Ford Explorer involves

An oil filter replacement for the 2020 Ford Explorer begins with fitting a filter matched to the engine’s specification. Because this model is available with engines from 2.3 to 3.3 liters and four to six cylinders, the correct filter is selected for the engine installed in the vehicle rather than treated as a universal component. The old filter is removed as part of the oil service, and the sealing area is addressed carefully.

Where the engine uses one, the service also includes a new drain plug gasket or washer. Renewing that sealing piece supports a proper seal when the drain plug is reinstalled. After the engine has been run, the filter seal is checked for leaks. This final check confirms that the filter and sealing surfaces are holding oil as intended. The manufacturer’s published maintenance schedule calls for oil filter replacement every 10,000 miles. When your 2020 Ford Explorer is due, schedule service at Herb Chambers Ford of Westborough.

Why the filter matters on a 2020 Ford Explorer

The 2020 Ford Explorer uses engines ranging from 2.3 to 3.3 liters and four to six cylinders across its trims. As engine oil moves through those components, it carries away debris created by normal operation. The oil filter holds that debris so the oil circulating through the engine is cleaner. Filtration is therefore part of the lubrication system, not merely an extra step added to an oil change.

As the filter loads with captured material, its bypass valve opens. That allows oil to keep moving, but it also means the engine is receiving oil that is no longer being filtered. A loaded filter does not stop the engine getting oil; it stops the engine getting filtered oil, and that is worse in a quiet way. This is why the filter is replaced with the oil rather than stretched across two changes. The manufacturer’s published schedule specifies filter replacement every 10,000 miles for this model year. If an oil-pressure warning appears, the engine sounds noisier than usual, or oil darkens quickly after a change, arrange an inspection.

Oil and filter service at Herb Chambers Ford of Westborough

Herb Chambers Ford of Westborough provides oil filter service for the 2020 Ford Explorer at 310 Turnpike Road, Rte 9, Westborough, MA 01581. The service is centered on the engine in your vehicle: the filter is matched to that engine, the applicable drain plug gasket or washer is renewed, and the filter seal is checked after the engine runs. These steps address both filtration and the sealing points involved in the service.

For maintenance questions or to arrange an appointment, use the online schedule appointment option. You can also review current service specials before booking. Call Herb Chambers Ford of Westborough at 508-501-8253, or visit 310 Turnpike Road, Rte 9 in Westborough for assistance with your 2020 Ford Explorer oil and filter service.