Herb Chambers Ford of Westborough

2018 Ford Explorer Oil Filter

Ford Explorer Oil Filter service at Herb Chambers Ford of Westborough in Westborough, MA

Frequently asked questions

The 2018 Ford Explorer is a practical SUV with engine configurations ranging from 2.3 to 3.5 liters and four to six cylinders, making an engine-matched oil filter important during routine maintenance. An oil filter service at Herb Chambers Ford of Westborough in Westborough, MA, includes a filter matched to the engine fitted in your vehicle, a new drain plug gasket or washer where required, and a leak check after the engine has been run. The manufacturer’s published maintenance schedule calls for oil filter replacement every 10,000 miles. Replacing the filter alongside the oil helps keep debris from circulating through the engine, so drivers can book service with a clear understanding of what the appointment covers.

What an oil filter replacement on a 2018 Ford Explorer involves

An oil filter replacement begins with fitting a filter matched to the engine specification of the 2018 Ford Explorer. Because this model is offered with engine sizes from 2.3 to 3.5 liters and cylinder counts from four to six, the correct filter depends on the engine actually fitted to the vehicle. The service also includes a new drain plug gasket or washer where the engine uses one. Renewing that sealing component supports a proper seal when the drain plug is installed again.

After the oil and filter work is completed, the engine is run and the filter seal is checked for leaks. This final check helps confirm that the filter and related sealing surfaces are holding as intended before the vehicle leaves the service area. The manufacturer’s published maintenance schedule states that the oil filter should be replaced every 10,000 miles. When your vehicle is due, schedule service at Herb Chambers Ford of Westborough so the filter can be matched to the engine and replaced alongside the oil.

Why the filter matters on a 2018 Ford Explorer

The 2018 Ford Explorer uses engine configurations ranging from 2.3 to 3.5 liters and four to six cylinders. As engine oil moves through an engine of this type, it carries away debris created during normal operation. The oil filter holds that debris instead of allowing it to continue circulating. A filter therefore does more than provide a fresh component during an oil change: it helps keep the oil-cleaning process working as intended.

Once the filter loads with debris, its bypass valve opens and oil circulates unfiltered. A loaded filter does not stop the engine getting oil; it stops the engine getting filtered oil, and that is worse in a quiet way. That is why the filter is replaced with the oil rather than stretched across two changes. An oil-pressure warning, an engine that sounds noisier than usual, a filter that has gone beyond the oil-change interval, or oil that darkens quickly after a change are useful reasons to arrange an inspection and service.

Oil and filter service at Herb Chambers Ford of Westborough

Herb Chambers Ford of Westborough provides oil filter service for drivers of the 2018 Ford Explorer in Westborough, MA. The appointment is centered on the engine installed in the vehicle: the replacement filter is matched to that engine, the applicable drain plug gasket or washer is renewed, and the filter seal is checked after the engine runs. This approach keeps the work specific to the vehicle rather than treating every engine configuration as interchangeable.

The manufacturer’s published maintenance schedule calls for replacing the oil filter every 10,000 miles. Service also gives drivers an opportunity to respond to an oil-pressure warning, unusual engine noise, or oil that darkens quickly after a change. To arrange an appointment, schedule service online or call 508-501-8253. Herb Chambers Ford of Westborough is located at 310 Turnpike Road, Rte 9, Westborough, MA 01581. You can also review current service specials before booking.

Frequently Asked Questions

6 common questions answered

Is the oil filter replaced every time a 2018 Ford Explorer has its oil changed?The manufacturer’s published maintenance schedule calls for replacing the oil filter every 10,000 miles.

Replacing the filter with the oil keeps debris from remaining in a loaded filter between oil services. The exact timing of an appointment can also depend on the vehicle’s service history and inspection results. A filter that has gone beyond the oil-change interval should be addressed rather than carried into another service.

  • Manufacturer-published interval: every 10,000 miles
  • Filter replacement performed alongside the oil
  • Service history helps determine what is due
What is included in an oil filter replacement on a 2018 Ford Explorer?The service includes an engine-matched filter, a new drain plug gasket or washer where required, and a leak check after the engine runs.

The filter is selected for the engine actually fitted to the 2018 Ford Explorer. After the oil and filter work, the engine is run so the filter seal can be checked. This confirms that the sealing surfaces are holding before the vehicle leaves service.

  • Filter matched to the installed engine
  • New drain plug gasket or washer where the engine uses one
  • Leak check at the filter seal after running the engine
What happens if the oil filter on a 2018 Ford Explorer is not replaced?A loaded filter can open its bypass valve, allowing oil to circulate without being filtered.

The engine still receives oil, but it does not receive oil that is being cleaned by the filter. Debris can therefore continue circulating instead of being held by the filter. An oil-pressure warning, unusual engine noise, or oil that darkens quickly after a change should prompt an inspection.

  • Debris remains in the oil-cleaning cycle
  • The bypass valve may allow unfiltered oil flow
  • Warning signs should be checked by a service professional
Does a 2018 Ford Explorer need a specific oil filter?Yes, the filter is matched to the engine, and filters are not interchangeable across engines.

The 2018 Ford Explorer is offered with engine configurations ranging from 2.3 to 3.5 liters and four to six cylinders. The correct filter depends on the engine actually installed, rather than only the vehicle name. Service includes matching the replacement filter to that engine without relying on a one-size-fits-all choice.

  • Engine displacement range: 2.3 to 3.5 liters
  • Cylinder range: four to six
  • Filter selection is based on the installed engine
Can the oil be changed on a 2018 Ford Explorer without changing the filter?The oil can be changed separately, but the manufacturer’s published schedule calls for replacing the oil filter every 10,000 miles.

Keeping a loaded filter in service can cause its bypass valve to open, allowing unfiltered oil to circulate. Replacing the filter alongside the oil removes captured debris and restores the intended filtering step. The vehicle’s service history and an inspection help determine what maintenance is due at an appointment.

  • Published filter replacement interval: every 10,000 miles
  • Loaded filters may allow unfiltered oil circulation
  • Service history helps establish maintenance needs
How do I book an oil and filter service at Herb Chambers Ford of Westborough?You can schedule service online or call Herb Chambers Ford of Westborough at 508-501-8253.

The service team can match the filter to the engine in your 2018 Ford Explorer and replace it alongside the oil. The appointment includes the applicable drain plug gasket or washer and a leak check after the engine runs. Drivers in Westborough can also review service specials before booking.

Related Pages

Helpful Links

Schedule ServiceService Specials