2017 Ford F-150 Brake Pads in Westborough, MA

A squeal or scrape may occur as pad material wears. Grinding means the friction material is gone and the backing plate may be contacting the rotor, so the vehicle should not continue being driven. An inspection determines whether pads, rotors, hardware, or fluid also need attention.

• Squeal or scrape during braking
• Grinding noise when the brake pedal is applied
• Longer pedal travel or stopping distance

The inspection covers rotors, calipers, hardware, and brake fluid condition. Brakes wear as a system, so replacing pads while ignoring a damaged rotor or other affected component can shorten the life of the new part. The condition found during inspection determines the appropriate work.

• Measurement of remaining pad material at all four corners
• Replacement with pads matched to the braking system
• Inspection of rotors, calipers, hardware, and brake fluid

City traffic, towing, hills, and hard stops can shorten pad life because they increase braking demand. There is no single lifespan that applies to every driver or load. Measuring the remaining material on all four corners shows whether replacement is needed now or at a later visit.

• City driving can require frequent braking
• Towing increases the work required to slow down
• Inspection measures actual remaining pad material

Brake service includes inspecting the rotors alongside the pads, calipers, hardware, and fluid. If worn pads have allowed the backing plate to contact a rotor, rotor replacement may be part of the repair. The inspection result, rather than the pad replacement alone, determines whether the rotors remain suitable.

• Rotors are inspected during pad service
• Grinding can signal rotor contact with the backing plate
• Pads, rotors, hardware, and fluid should be assessed together

A grinding sound means the friction material is gone and the backing plate is on the rotor; stop driving and book brake service. Squealing, scraping, longer pedal travel, or longer stopping distance also call for prompt inspection. A technician can assess the complete system and identify the condition found.

• Grinding means the friction material is gone
• Longer stopping distance requires prompt attention
• Have pads, rotors, calipers, hardware, and fluid assessed

Use the online schedule service form to request an appointment in Westborough, MA. The visit includes measurement of remaining pad material on all four corners and inspection of the surrounding brake components. You can also review service specials before contacting the dealership.

• Schedule online through the service appointment form
• Call 508-501-8253
• Visit 310 Turnpike Road, Route 9, Westborough, MA